Programming Plug for Bendix King EPH, GPH, DPH LAA0701 BK Radios Program Radio

Description

This listing us for
ONE
,  NEW -- BK Programming Plug connector just like in the photos.
These are made to do Field Programming of Bendix King Radios. Just pug them in and hold the Function button to access Programming.  We have wired these up so all you have to do in plug then in and follow programming instructions (NO instructions supplied with connector)
Programming Plug which fits:
Bendix King DPHX5102X
Bendix King DPH5102XCMD
Bendix King GPH5102XP
Bendix King GPH5102XCMD
Bendix King EPU4992M
Bendix King EPV4992M
And more
Quick same day shipping!
BULK ORDERS WELCOME,  ask for prices.
Product Name: 20dB PC to Arduino RF Wireless Module Kit USB UART RS232 RS485 for UNO ARM STM32
Module No.: TB389
Packing list:
2 pcs 2.4G RS232(TTL Lever) Wireless Transceiver Module;
1 pcs
USB to TTL 232
(Ch340 IC)
1 pcs 5pins female to female dupont wire;
Wireless communication between Arduino and PC(Also application with other 3.3V/5V level MCU ，
for example: FPGA CPLD STM32 C8051 PIC AVR MSP430)
NOTE :
Packing list
Does not include
Arduino UNO
ARDUINO IDE Serial data Transceiver：
Copy the following code：
//----------------------------------------------------------------------//
// Pin 13 has an LED connected on most Arduino boards.
int led = 13;
String comdata = "";
void setup()
{
// initialize the digital pin as an output.
pinMode(led, OUTPUT);
Serial.begin(9600);
Serial.println("Hello, I am Arduino!");
}
//Serial data transceiver
void loop()
{
while (Serial.available() > 0)
{
digitalWrite(led, HIGH); // turn the LED on (HIGH is the voltage level)
comdata += char(Serial.read());
delay(2);
}
if (comdata.length() > 0)
{
Serial.println(comdata);
comdata = "";
}
digitalWrite(led, LOW); // turn the LED off by making the voltage LOW
}
//----------------------------------------------------------------------//
Overview:
TB387 is based on 2.4GHz frequency band wireless transparent data-transmission module.
Module supports most basic AT commands: baud rate, ID number, frequency settings and inquiries; factory settings; version information.
When the module is in AT module, users can use serial-port to issue AT commands to set the module's parameters.
When the module is in transparent data transfer mode, the user transmit data, frame number data module, add packaged rowcount, and then automatically transmit , at reliable range, the module will automatically re-transmit data to ensure successful transmission.
Performance Parameter:
Working voltage: 3.3V-5.5V;
RS232 Interface ( 3.3V/5V TTL level)
Frequency range: 2402~2482MHz
Transmit power: 20dBm(100mw);
Receiver sensitivity: -87dBm;
Operating temperature: -40~+85 ° c;
Transparent transmission mode baud rate:
2400,4800,
9600（Default)
,14400,19200,38400,57600,115200,12800,25600
AT mode configured baud rate fix is: 9600;
Open ground Transmission distance(5V Power) : 400 meter
when transmitting, current up to 120mA; receiveing current is 30mA , please use smaller ripple power supply
Pinout :
1, VDD:3.3V or 5V power supply ;
2, GND: Power Ground;
3, TXD: serial port output, Arduino or USB to serial port RXD;
4, RXD: serial port input, Arduino or USB to serial port TXD;
5, CMD: Enter PIN AT mode, active low level;
Data Sheet : Please contact seller on ebay message ;
Typical applications：
Arduino Wireless data transmission
2402-2482MHz ISM/SRD band systems
Consumer electronics
Access control, Attendance, Logistics
Smart Furniture
Robert
Wireless sensor
Remote control, remote measurement system;
Wireless meter;
Access control ;
Identification system;
Data collection;
IT household appliance;
Intelligence household appliance ;
Baby monitoring system;