-40%
FM Transmitter Package 1500 Watt 87.5-108Mhz Broadcast Standard Stand Alone
$ 2111.47
- Description
- Size Guide
Description
Brand NewSeperate Exciter and Amplifier , making it Durable and easy maintenance.
Exciter 30 Watt
+
Amplifier 1500 Watt
FMT-1500W Stand Alone Broadcastmachines
More Than Expected
1500 Watt Continuous Duty Broadband FM Transmitter
using the latest Transistor
Large LCD Design
MOSFET Power Design
Simple Operation
Very Big Heatsink-Great Cooling system
SWR Protection
THERMAL Protection
Audio Limiter
RF Power Control 0 – 1000 Watt
Power Off when change Frequency
Stereo Design , with excellent sound
World Wide Compatibility
220/
Low Harmonics
In 19” Rack , easy Mount
1 year limited warranty
HEAVY DUTY
1500 Watt FM Stereo Transmitter
We offer you the best performance for 1500 watt FM Transmitter, with Excellent Design, Heavy Duty for 24/7 and yet with Lower price than others in market. The Output power is adjustable from 0 – 1500 Watt
Our transmitter has all the equipment needed to protect it from High SWR, Over Heat and Great Cooling fan are build in beside the VERY BIG HEAT SINK to release the Heat from the mosfet.
It comes with LCD Design, for easy reading at dark, LED to indicate when the transmitter is ready,Over Heat and high SWR will activate the Protection system to Deactivate the Exciter system, so the Transmitter is SAFE at all condition.
This Transmitter will survive at all condition all around the world, it was Design for Community or Hobby Broadcast and Commercial Broadcast
SPECIFICATION :
Frequency
87.5 – 108 Mhz Broadband Design
Frequency Step
50 Khz
RF Power
0 – 1500 Watt Tolerance 0.5 db
PA Board Efficiency
80%
PSU Efficiency
90%
VSWR Protection
2:1 ( adjustable )
Distortion
0.02%
Modulation
Direct FM
Harmonic Output
>60 dbc
Spurious Output
-86dbc
stereo separation
>70dB
Audio System
Stereo or Mono Selectable
Audio Input Level
0.2 V
Audio Response
1Hz-100kHz
Limiter Pre emphasis
75 uS
Audio Input
RCA Right Left + MPX
Control system
1Multi Knobs
Cooling System
1 Jumbo Fan , and 2 Regular Fan, Heavy Duty Design
Power Input
Universal mains input 220 Volts
Dimension
Standard 19”
Weight
23 kg
You will need to get the appropriate broadcasting licence to operate these transmitters.
We give Full Warranty for all our product Transmitter
1 Year SparePart Warranty
2 years Service Warranty
Postage by
FEDEX and DHL Express
Normaly 5-8 days delivery Time
FrequencyRF
-
Giant Communication
Giant Communication Deliver all Amateur Radio Equipment , Please Ask if you have any Custom design requirement, We design and Manufacture FM Transmitter and TV Transmitter , High Power Amplifier from HF , VHF , UHF.
We also build any kind of Antenna system for HF , VHF , UHF , Yagis, Dipole, Log Periodic, Vertical ,
For Bulk Purchase for special need, we do also offer our customer.
Please Ask for any Specification that you want ,
Please Be Wise for the purchase , this is the International Shipment, Buyer will need to pay for the Return ,
Thank you
TERMS & CONDITIONS
·
Dear Buyer, Please Note that this item is exactlly like the picture, We took picture from our original Stock.
·
Serial Number might be different.
DELIVERY.
·
Dispatch of goods will be arranged through us.
·
Packing is Good, we are in the Ebay Business for 15 years
·
We Use FEDEX and DHL Express , for Remote Area cases we will ask buyer.
·
If problems do arise, please contact us , and we will kindlly resolve any issues.
·
Postage with Trackable with Tracking Number
·
Please Be Wise , this is International Shipment, the unit will be carefully checked before we send it, we don't offer Return, but if customer want to return it, customer need to pay for the Postage return.
Thank you
SELLER CODE = MM1
ICS-CTRL, Linker IIa Dual Duplex Controller
ICS-CTRL, Linker IIa Dual Duplex Controller
Programming
Very easy to set up and operate
Uses the ICS operating system
Values entered in volts, seconds, WPM (Even Fractional Values)
Uses More, Good, Bad, indications when programming in values and parameters
All programmable data stored in onboard EEPROM
Over 130 functions available (and more to come…)
Has excellent support for X banding – Interoperability – One service can talk to another
Programmable courtesy tones
Separate, full control receiver input, separate COS and audio inputs
DTMF Control System
DTMF for programming and control
DTMF control using Port 2 if enabled
25 DTMF programmable code / function memories
Each DTMF code can be programmed to be from 1 to 5 digits
Has DTMF muting on both ports (can be disabled)
In programming mode all functions can be entered in directly using their 2 or 3 digit number
Setup mode (programming mode) Control op mode and User mode
Electronic Control System
High quality JFET opamps – Top audio quality, High output
High quality JFET transistors used in the audio circuit
Programmable timer for TX fan control
Programmable courtesy tones
Microprocessor control of encode and decode
Beacon mode
Programmable Antikerchunker filter
Discriminator or straight through audio for all 3 receiver ports
By adding a resistor audio can go from the control RX to the repeater TX
Seven high quality pots (Bourns) for level adjustments
Nine LED’s for system status indication
Built in Watchdog timer
The Linker IIa has 3 auxiliary outputs (one or two are shared with port 2)
CTCSS and COS
Full control receiver port, COS, audio and has priority
Separate Plug for a third party encode / decode module (TS 64)
COS only, CTCSS only, AND, OR functions available on ports 1 and 2
Encode is mixed in with the transmitter’s audio if enabled
Voltage and polarity selectable COS input for the control receiver
Voltage and polarity programmable COS and CTCSS inputs for both port 1 and 2
Special dedicated 10 pin plug for port 1 CTCSS
A programmable encode hang timer can be enabled / disabled
Antikerchunker filters on Port 1 and Port 2
Port 1 and Port 2 activate TX1 encode, if enabled, port selectable
Remote Base / Link functions (Port 2)
Port 2 can be setup as half duplex, full duplex, slave repeater and xpeat
Remote base memories are controlled by the Linker IIa controller
Remote base memory number readback after the memory is selected and by request
Selection of a remote base memory is done just by selecting the memory number
The remote base control system remembers the current remote base memory
The Linker IIa will return the remote base to the home memory when disabled
Shipping
Shipping cost:
US - USD
International - USD
Delivery time:
US - 3-5 days typical
International - 1-3 weeks typical depending on location and customs
Payment
We accept the following payment methods:
Paypal