CDI 83060 Broadband Peak/Avg RF Wattmeter 15-1500W 25-1000 MHz

Description

CDI 83060 RF Wattmeter
Broadband 25-1000 MHz - No Elements to Buy!
Multi-Range 15-1500 Watts - No Elements to Buy!
Similar to Bird 4304A PLUS Peak Reading & 1500 Watts!
Single Non-Removable Broadband Element  - No Elements to Buy!
N(F) Connectors, Quick Connect, others available, UHF, BNC, 7/16 EIA
Connectors are interchangeable with Bird QC connectors
25-1000 MHz permanent element is included.
15-1500 Watts in Five Selectable Scales
Reads Peak & Average Power, Telemetry, Pulse, SSB, Television, Radar
Shock Mounted "Taut Band" Meter
Large Easy to Read 4-1/2 inch Mirrored Scale for accuracy
Tough Baked Enamel Finish Will not Chip or Scratch with normal use
Quick Match Connectors Type N or UHF (Bird Compatible)
Internal 7/8" Line Section In-line Design
Gold Plated Element (Included)
Two Year Limited Warranty
Up to 1500 Watts, Peak & Average Reading, unrivaled accuracy and No Elements To Buy, this top quality in-line wattmeter does it all! Similar in appearance and operation to Coaxial Dynamics Model 81060 Wattmeter, the Model 83060 converts from Average Reading to Peak Reading, with the flip of a switch, by inserting a peak reading amplifier between the element and the meter.
The Model 83060 is designed to measure RF power in amplitude modulated systems such as television, telemetry, radar and peak envelope power (PEP) such as SSB and AM signals. No other wattmeter offers as much versatility and band coverage.
The use of a rugged shock mounted meter with a mirror-backed scale along with superior taut band technology, provides reliable and accurate readings, and also that satisfies both the US Navy and Canadian standards for bounce and vibration. This is your assurance of complete accuracy.
Your confidence in the quality and dependability of the Model 83060 Wattmeter is assured with the Coaxial Dynamics Two Year Limited Warranty.
Specifications
Power Ranges 15, 50, 150, 500 and 1500 watts full scale (500 watts maximum from 800 to 1000 MHz)
Frequency Range 25 MHz to 1000 MHz
Accuracy (Average Mode) 25 to 100 MHz, ±7% of full scale using corrections chart 100 to 512 MHz, ±6% of full scale, no correction required 512 to 1000 MHz, ±7% of full scale, no correction required
Accuracy (Peak Mode) 25 to 100 MHz, ±9% of full scale using corrections chart 100 to 512 MHz, ±8% of full scale, no correction required 512 to 1000 MHz, ±9% of full scale, no correction required
Insertion Loss 0.10 dB max. from 25 to 512 MHz (with UHF female connectors) 0.15 dB max. from 512 to 1000 MHz (with UHF female connectors)
VSWR 1.08 max. from 25 to 512 MHz (with UHF female connectors) 1.12 max. from 512 to 1000 MHz (with UHF female connectors)
Element Non-Removable Broadband (25 to 1000 MHz, 1500 watts max.) rotatable for forward and reflected power measurements
Impedance 50-Ohms
Pulse Parameters Square Pulses: Min. Pulse Width .5 µsec 100 to 1000 MHz 2 µsec 26 to 99 MHz 15 µsec 2 to 25 MHz Min.
Repetition Rate30 pps Gaussian Pulses: Min. Pulse Width .5 µsec 25 to 1000 MHz 15 µsec 2 to 24 MHz Min.
Power Requirements One 9 volt alkaline transistor battery (supplied)
RF Connectors Type N Female standard (see note below)
Dimensions (H x W x D)7.3 in. (18.5 cm) x 5 in. (12.7 cm) x 4 in. (10.2 cm)
Weight 4.0 lbs. (1.81 kg)
Case Finish Textured Blue Polyurethane Enamel
Note: Other Quick Match Connectors are available.
International Customers
We subscribe to eBay's Global Shipping Program
Questions?
Martin RF Supply
9-5 EST USA
DIY Repeater RX/TX Box TX and Rx Indicat for BAOFENG TYT WOUXUN KIRISUN HYT Relay Box Two Way Radio Walkie Talkie
This simple relay box is used for DIY relay receiver / transmitter,use it to connect two handheld walkie-talkies, one for signal reception and one for signal transmission, so as to establish a temporary relay station and expand the communication range. K Port For Kenwood and most brand radios with the same connector.
The scope of application:
1. The link between the relay station and relay station 2. Relay station signal coverage area of signal extension 3. The field construction of cable erection 4. Underground mine 5. Cave construction 6. Culvert emergency rescue 7. V-U cross section relay 8. Small basement and ground walkie talkie signal connection 9. Large activities and other occasions emergency use!
Install:
Two Handheld Two Way Radios connect with repeater through earphone plug, as show in picture:
The matters needing attention:
1. The relay box for audio trigger mode, so when you use the walkie talkie volume to yourmaximum, otherwise may appear not to send state. 2. Such as transmission delay time is too long (more than 3 seconds), conventional because walkie talkie transmit antenna near the trunk box too close to cause the transmitted signal interference caused by relay box! Can be used to solve the problem of interference of external interphone antenna! 3. Two walkie talkie antenna between the two of them try to distance! At least not less than 5 metres! (two walkie talkie antenna avoid parallel erection!)
Package included:
1x Walkie Talkie Repeater Box for Baofeng Kenwood (Includes K-type cable)